How To Measure Window Well Covers

How To Measure Window Well Covers. 2 place the tip of the tape measure against the window and pull out the tape measure to the front edge to measure the well’s depth. Measure how far the well projects out from the house wall (not the window) to the outside edge of the well top (b).

Custom Window Well Covers enter your size, order online! from windowwellcovers.com

Measure the width of the window well at both the front and back, where it touches the house. You can do this by taking a horizontal measurement. 3 measure the window well’s height from the ground.

A Minimum Clear Opening Size Must Be At Least 5.7 Square Feet.

Window well grates seem simple enough to install but when it comes down to understanding the curvature and how that will aligns with your actual window well is when things seem to get pretty complicated. Wellexpert is the #1 window well cover company in chicago and the midwest. Flip the cardboard over and use a marker.

You Can Do This By Taking A Horizontal Measurement.

You are less likely to bump the covers off their frame. 2 place the tip of the tape measure against the window and pull out the tape measure to the front edge to measure the well’s depth. 75260 area wall cover (well made, heavy (no raccoons), won’t need to be replaced.)

Do The Same Thing On The Side And Front Of Large Window Well Covers Using Two Or More Clips.

Weighing just under two pounds, it’s easy to install and can be flipped to accommodate round and rectangular window wells. Measure how far the well projects out from the house wall (not the window) to the outside edge of the well top (b). Holds up to 850 lbs of weight.

Then Measure From The Side Of The House To The Outside Edge Of The Window Well In At Least Two Places.

42″ (width) x 17″(projection) x 15″ (height) If your window is completely below ground level or the top of the window well, you will want to get a low profile or flat style window well cover. Then you should measure the outside edge to the house for an accurate projection measurement.

These Window Wells Are Used To Pull Up The Groundwater Regularly.

There are also code requirements for both natural light and ventilation. Measure the same as above omitting the last measurement. Now measure from the center of.